** Alt A: Arrange Fieldscrolls Toggle Change to arrangement of the Fieldscrolls in all the Quickcards in the current rack; You can INSert, DELete (cut), and Move Fieldscrolls, and Split and Join lines. ** Alt A: Exit Arrange Fieldscrolls Toggle Toggle off the menu of Arrange Fieldscroll Commands. The Arrange commands to INSert, DELete, and move around Fieldscrolls for all the Quickcards in the current rack. ** AltB Browse ** Toggle Toggle on the menu of comands that let you browse (or navigate) within the current text line. ** Alt B: Exit Browse Toggle Toggle off the menu of commands that let you browse (or navigate) within the current line. ** ALT E: Show edit text commands Toggle Toggle on a menu commands to modify the current text line. *** Use F3 to toggle between single line and full screen editor. ** Alt E: Show edit text commands Toggle Toggle off menu of commands ot modify the current text line *** Use F3 to toggle between single line and full screen editor ** Alt F: Fieldscroll commands Toggle Toggle on the menu of commands which determine how the current Fieldscroll is displayed. You can change a field's relative display width and label (name)** Alt F: Exit Fieldscroll commands Toggle Toggle off the menu of commands which determine the current Fieldscroll is displayed. You can change a field's relative display width and label (name)** ALT E: Show edit text commands Toggle Toggle on a menu commands to modify the current text line. *** Use F3 to toggle between single line and full screen editor. ** Alt E: Show edit text commands Toggle Toggle off menu of commands ot modify the current text line *** Use F3 to toggle between single line and full screen editor ** Alt H Help commands Toggle Hold down ALT and press H to toggle on a list of commands that are always available to help you. Hold Ctrl down and press -> to go right on menu. New users should have GETSTART loaded. ** Alt H Help commands Toggle Hold down ALT and press H to toggle on a list of commands that are always available to help you. Hold Ctrl down and press -> to go right on menu. New users should have GETSTART loaded. ** Alt J Jump Toggle Toggle on a menu of commands that let you navigate (jump) to other lines in the current Fieldscroll. ** Alt J: Exit Jump Toggle Toggle off a menu of commands that let you navigate (jump) to other lines in the current Fieldscroll. ** Alt M: Modify or create new information Toggle Toggle on a list of commands that let you alter racks, cards, and Fieldscrolls. Includes INSert to create new cards and racksand edit to edit a Fieldscroll. Use insert rack to load a rack. ** Alt M: Exit Modify or create new information Toggle Toggle on a list of commands that let you alter racks, cards, and Fieldscrolls. Includes INSert to create new cards and racksand edit to edit a Fieldscroll. Use insert rack to load a rack. ** AltN: Nearby (local navigation) Toggle Toggle on a menu of commands that take you to adjacent Zoomracks, Quickcards, Fieldscrolls and lines ** AltN: Exit Nearby (local navigation) Toggle Toggle on a menu of commands that take you to adjacent Zoomracks, Quickcard, Fieldscrolls and lines ** AltO: Other Toggle Toggle on a menu of miscellanious comands: Typeout (Print) ASCII file save, Sort, Screen Width and Height, Do a Macro, and define a macro. ** AltO Exit Other Toggle Toggle on a menu of miscellanious comands: Typeout (Print) ASCII file save, Sort, Screen Width and Height, Do a Macro, and define a macro. ** Alt U: Usual Toggle Toggle on the menu of main menu commands that are available in Edit (or format) ** Alt U: Exit Usual Toggle Toggle off the menu of main menu commands that are available in Edit (or format) ** AltZ: Zoom Toggle Toggle to a menu of Zoom commands: Zoom rack, Quickcard Fieldscroll or labels. Zoom commands toggle (alternate) betweencloseups and long shots of the information ** AltZ: Exit Zoom Toggle Toggle off a menu of Zoom commands: Zoom rack, Quickcard Fieldscroll or labels. Zoom commands toggle (alternate) betweencloseups and long shots of the information ** > Go to the rack on the right Inverse: > Force into multirack mode; then go to rack to right of this rack. (To add or delete racks from working racks see rack number in ALT G menu.) ** < Go to the rack on the left Inverse: > Force into multirack mode, then go to rack on left of this rack.(To add or delete racks from working racks see rack numbers in ALT G menu.) ** -> Character right Inverse: -> Move cursor right one character in the text. ** Control -> Inverse: Control <- Move the current command on the command line right. Hold down Ctrl (next to he A) and press ->. To undo Control ->, use its inverse (Control <-) indicated in the upper right hand corner. ** Control <-: Command left Inverse: Control -> Move the current command on the command line left. Hold down Ctrl (next to he A) and press <-. To undo Control <-, use its inverse (Control ->) indicated in the upper right hand corner. ** A: Save rack in ASCII format Inverse: none Used to send Zoomracks data to external applications. Save this rack in ASCII on MS-DOS file with extension .ASC Note: Insert Rack command will loads ASCII save files. ** A: Print All Quickcards Escape Stops printing Print out all text in all Quickcards ** Control A: Word Left Inverse: Control F Move the cursor left one word. ** Backtab Inverse: TAB Go to previous fieldscroll (Field) Every Fieldscrolls can have up to 80 characters by 250 lines ** Backtab Inverse: TAB Move this fieldscroll left; if at the begining of the line, move it to the preveious line. ** C: Copy C: Toggle; C X: No inverse Turn on menu of copy options. You can copy a this rack, card fieldscroll to put in a buffer. Use the Paste command to insert the copy elsewhere. ** C: Exit Copy C: Toggle; C X: No Inverse Turn off menu of copy options. You can copy a this rack, card fieldscroll to put in a buffer. Use the Paste command to insert the copy elsewhere. N O T U S E D 9.0 N O T U S E D 9.4 ** Continuous printing Escape to stop printing Print out Quickcards with height and width set by display command. No page ejects inserted. Use to print out labels. Use F9, F2, D W, and D H to determine form of printout. ** ESCape C-Clear ALWAYS AVAILABLE Inverse: none Normal ESCape command. Like Clear on a calculator. Stop executing current command. Exit multirack mode and return to main menu. ** DEL: Cut/DELete DEL: Toggle; DEL X: Inverse: Paste X Toggle on a menu of Delete options. You can remove a Quickcard, Zoomrack or (in format only) Fieldscroll. To move a card or rack: Do Cut(DEL), go to new place, then paste it in. ** DEL: Exit Cut/DELete DEL: Toggle; DEL X: Inverse Paste X Toggle off a menu of Delete options. You can remove a Quickcard, Zoomrack or (in format only) Fieldscroll. To move a card or rack: Do Cut(DEL), go to new place, then paste it in. 10 8 10 12 ** DEL: cut character left Inverse: Ctrl P Paste Delete the character to the left of the cursor. If the previous command was a cut command, append to the paste buffer, otherwise clear paste buffer first. ** Control P D: Paste Date Inverse: cut commands Insert Computer's date in the text. ** Quit and Discard Inverse: none Exit Zoomracks and discard all changes. Don't update DOS files. ** END: go to last END: Toggle; End X Inverse: Inversego X Toggle on menu of things to which you can go the last one of. Currently Q for last Quickcard is the only option. ** END: Exit last END: Toggle; END X: Inverse: Inversego X Toggle off menu of things to which you can go the last one of. Currently Q for last Quickcard is the only option. ** END: go to last END: Toggle; End X Inverse: Inversego X Toggle on menu of things to which you can go the last one of. Currently Q for last Quickcard is the only option. ** ESCape ALWAYS AVAILABLE Toggle Escape toggles on a menu of commands that let stop what you are doing and ESCape to a safe place. Being a toggle, pressing it twice does nothing. ** Exit Escape. ALWAYS AVAILABLE Toggle Escape toggles off a menu of commands that let stop what you are doing and ESCape to a safe place. Being a toggle, pressing it twice does nothing. ** Fieldscroll. Inverse: See first menu item Copy, Replace or goto first or last, Fieldscroll ** Fieldscroll. Inverse: See first menu item Copy, Replace, goto first or last, or (in format) insert or delete a Fieldscroll ** Control F: Word Right Inverse: Control A: Move the cursor one word in to the right. ** F1: Zoom Rack Toggle Toggle between single rack mode (one rack full width) and multirack mode: (All the "working" racks.) To display other racks see the commands 1..0 in ALT G. ** F2: Zoom Quickcard Toggle Toggles between multiline mode (the first line of several cards), and single card mode (just the current card). ** F3: Edit Fieldscroll line Toggle Telescope current field and turn on line editor Use TAB to go to next field ** F3: Zoom Fieldscroll Toggle Telescope current field and turn on line editor Use TAB to go to next field ** F5: change/create rack Format Toggle Used to insert, delete, and move ALL fields in rack. To make a new rack format, start with an empty rack and insert new fieldscrolls and move around as desired. F5: Exit Format/create rack ** FORMAT MENU ** Toggle Keep this rack format. ** F5: Undo Format. Inverse: Ctrl U F5 Undo current format with alernate format. ** F6: Edit Fieldscroll F6: Toggle; F6 ... Inverse: Undo Toggle on Full Fieldscroll editor. Use TAB to goto next field. ** F6: Exit Edit Fieldscroll F6: Toggle; F6 ... Inverse: Undo Toggle off full Fieldscroll editor. ** Undo Edit. Inverse: Ctrl U F6 toggles Restore Fieldscroll as it was on beginning of edit. Subsequent Undo's toggle between two versions of your text. ** F6: Edit Field Label F6: Toggle; F6 ... Inverse: none Edit the name of the current Fieldscroll. F9 Label command toggles on and off labels. ** F6: Exit Edit Field Label F6: Toggle; F6 ... Inverse: none Exit editing the name of this Fieldscroll. ** SHIFT F6 Edit rack name Ctrl F6: Toggle Change the name of the DOS File that the current rack will be saved on when you copy rack or quite Zoomracks. ** SHIFT F6: Edirt rack name Toggle Enter and edit name of the DOS file this rack will be saved on whne you do copy rack or exit Zoomracks ** F7: Do a macro F7: Toggle; F7 ... Inverse: none A macro is an abbreviation for a series of keystrokes. Rack 1 is a rack of macros which you can define with SHIFT F7 F7 lets you execute those macros. (ADVANCED FEATURE) ** Shift7: Define a macro SHIFT F7: Toggle Defines a macro (abbreviation) for a series of keystrokes and gives it a name A-Z and puts it in rack 1. To abort a macro use ESCape M. Edit macro or comment in rack 1 if you wish. ** F8: Search/Select matching cards Inverses: F8, iNversego Q Find next card whose first line of this field matches input string. Also, select all matching cards. ** Select/Search Inverses: F8 F8, iNversego Q To search, enter text then press F8. Pressing F8 twice in immediate succession toggles between showing all cards in a rack and only those that match the select string. ** Do Select Inverse: Inversego Q Terminate search/select string and find to best match. 18 8 18 12 ** F9 Toggle Fieldscroll label display Toggle Toggle the display of Fieldscroll labels on or off. ** <- Left character Inverse: -> Move the cursor one character to the left in the text. ** HOME: First HOME Toggle; HOME X: Inverse: Inversego Toggle on a menu of places to go to the first of: Zoomrack, Quickcard, Fieldscroll or Line. ** HOME: Exit First HOME Toggle; HOME X: Inverse: Inversego Toggle on a menu of places to go to the first of: Zoomrack, Quickcard, Fieldscroll or Line. ** HOME: First HOME Toggle; HOME X: Inverse: Inversego Toggle on a menu of places to go to the first of: Zoomrack, Quickcard, Fieldscroll or Line. ** Insert /create INS: Toggle; INS X: Inverse Cut/DEL X Create, insert a rack, card, or (in format) Fieldscroll. Insert Quickcard prompts for text; TAB between fields Insert Zoomrack Asks for DOS file name to load. ** Exit Insert INS: Toggle; INS X: Inverse Cut/DEL X Insert Inserts a Rack, Quickcard, or (in format) Fieldscroll. Insert Quickcard prompts for text; TAB between fields Insert Zoomrack Asks for DOS name of rack file to load ** INS Insert / typeover toggle Toggle In Insert mode text is inserted. In Typeover mode text typed in is typed over existing text. ** J Join lines Inverse: Split Join the text/fields on this line with the following line. ** Down arrow: Inverse: Up arrow Move down on screen: This command might do next page, next Fieldscroll or next line depending on the display. ** Leap down Inverse: Leap Up arrow Move the cursor down about 1/2 screen. ** Up arrow: Inverse: Down arrow Move up on screen: This command might do previous page, previous Fieldscroll or previous line depending on the display. ** Leap up Inverse: Leap down Move the cursor up about 1/2 screen. ** F10 Leap Toggle Leap PgDn does about 20 PdDn. Similarly followed PgUp, or up or down arrow does about 20 of them. ** F10 Exit Leap Toggle Leap PgDn does about 20 PdDn. Similarly followed PgUp, or up or down arrow does about 20 of them. ** Line Inverse: See first menu item Go to indicated Line in this Fieldscroll ** Ctrl P B Paste Line Inverse: Cut Commands Paste paste buffer of most recent cuts into text. Paste buffer will accumulate several successive cuts. ** Move Field Toggle Move current Fieldscroll on all Quickcards to new place. Notice that successive lines of Fieldscrolls are put on successive screen lines if there are no other fields there. ** Exit Move Field Toggle Leave current Fieldscroll on all Quickcards in this place. Use TAB and BACKTAB to move Fieldscroll then M to exit Move. 23 12 ** ESCape M - Abort Macro Inverse: None Like ESCAPE c except that if you are using SHIFT F7 to define a macro. It aborts the partially completed macro, deleting it from rack 1, ** Ctrl R M: Set right margin Inverse: Self Set the right margin of fieldscrolls in this rack to the current column. Used by word wrap and paragraph reformat. ** N: Inversego N Toggle; N X Toggle Inversego returns to a Quickcard you were recently at. It returns from the the most recent Home, End Select, iNversego, insert Quickcard, or edit first field. ** N: Exit Inversego N Toggle; N X Toggle Inversego Q returns to a Quickcard you were recently at. It returns from the the most recent Home, End Select, iNversego, insert Quickcard, or edit first field. 25 0 ** One Quickcard. Inverse: none Print out one Quickcard of information in full including all hidden information. ** P: Paste P: Toggle; P X: Inverse: DEL Toggle on a menu of things to paste: Rack, or Quickcards. Paste Quickcard pastes the Quickcard in sort order. Paste Zoomrack pastes the rack to the left. ** P: Exit Paste P: Toggle; P X: Inverse: DEL Toggle off a menu of things to paste: Rack or Quickcards. Paste Quickcard pastes the Quickccard in sort order. Paste Zoomrack pastes the rack to the left. ** P: Exit Paste P: Toggle; P X: Inverse: DEL Toggle off a menu of things to paste: Rack or Quickcards. Paste Quickcard pastes the Quickccard in sort order. Paste Zoomrack inserts before the current place. ** Ctrl P: Paste Ctrl P: Toggle; Ctrl P X Inverse: Cut Toggle on a menu of things to paste in: Most recent cuts, date or time into the text. ** Ctrl P: Exit Paste Ctrl P: Toggle; Ctrl P X Inverse: Cut Toggle on a menu of things to paste in: Most recent cuts, date or time into the text. Ctrl R P: Paragraph Reform Inverse: none Readjust the text from the curssor to the next blank line. This accumilates all partial lines into full width lines. ** PdDn (Shift down arrow) Inverse: PgUp Go to next Quickcard in the Zoomrack. ** PdDn (Shift down arrow) Inverse: F10 PgUp Leap down about 1/2 screens of Quickcards in the Zoomrack. ** PgUp (Shift up arrow) Inverse: PgDn Go to previous Quickcard in the Zoomrack. ** PgUp (Shift up arrow) Inverse: F10 PgUp Leap up about 1/2 screens of Quickcards in the Zoomrack. ** Q Quit Zoomracks Q: Toggle; Q X: No inverse Toggle on a list of quit Zoomracks options: Save or discard your changes. Also lets you make a demonstration copy ** Q: Exit Quit Zoomracks Q: Toggle; Q X: No inverse Toggle off a list of exit Zoomracks options: Save or discard your changes. ** Q: Quickcard Inverse: See first item on menu Cut, Copy, Paste, or Insert Quickcard Insert Quickcard is the normal way to enter new cards / data into Zoomracks ** Q: iNversego Quickcard N Q: Toggle Return to where you did the last HOME, END, Search/Select, edit of first field, insert Quickcard, or Inversego Quickcard you did. ** R: Replace R: Toggle; R X: No inverse Toggle on a list of things you can replace: Currently just Fieldscroll. ** R: exit Replace R: Toggle; R X: No inverse Toggle off a list of things you can replace: Currently just Fieldscroll. 29 8 29 12 ** Ctrl R Reformat Commands Ctrl R: Toggle Toggle on menu of reformat command options Reformat the text in this Fieldscroll. Join and Split lines, Reformat paragraph; set margin ** Exit Reformat Ctrl R: Toggle Toggle off menu of reformat command options. reformats text in this Fieldscroll: Join and Split lines, reformat paragraph and set margin. ** Sort S: Toggle Alphabetically sorts the current rack by the current Field. Numbers are sorted in digit order. (Sort in ASCII order.) To do inverse, resort by previously sorted Fieldscroll. ** S: Exit Sort S: Toggle Exit sort rack ** R- Sort Rack Inverse: Resort by previous sort field Sort Rack sorts the current rack alphabetically. Numbers are sorted in digit order. (Does an ASCII Sort.) To do inverse, resort by previously sorted Fieldscroll. ** Split Inverse: Join Split this line into two lines at the cursor. This is particularly useful in format to insert several blank lines so fields can be used as columns or text fields. 31 8 ** Quit and Save Inverse: Reenter Zoomracks and reload racks Saves all racks on system files and exits from Zoomracks ** P Paginated Typeout Escape to stop printing Print out the current rack as is displayed on the screen. Hidden text will not be printed. Page ejects inserted Use F9, F2, D W, and D H to determine form of printout. ** ESCape L - Long shot ALWAYS AVAILABLE Inverse: none Like ESCape C except it also forces multirack mode like a long shot in movie. It also forces multicard mode, and labels off. (Useful when you define a macros to ensure a known state.) 32 8 ** Tab Inverse: Backtab Go to next (right) field in the Quickcard. Tab is immediately tothe left of the "Q". (Each field can hold up to 80 characters by 250 lines even when a few characters are displayed.) ** Tab: Move right Inverse: Backtab Move this Fieldscroll to the right on all Quickcards in this rack. ** T: Type out (Print) T: Toggle T x: Escape stops printing Toggle on a menu of print options. You can print the full text of Quickcards, or you can print them in screen format. ** T: Exit Type out (Print) T: Toggle; Escape stops printing Toggle off a menu of print options. NOTE: IF PRINTER NOT ON, COMPUTER WILL HANG ** Ctrl P T: Paste Time Inverse: Cut commands Insert the time of day from you computers clock into the text. ** Ctrl T Delete word right Inverse: Ctrl PControl T deletes a word or partial word to the right and puts it in the paste buffer. single cuts go into an emptied paste buffer. Successive cuts are appended into it. ** Control U: Undo Format Ctrl U Toggle; Ctrl U U: Toggle Toggle on ability to restore format to what it was when Format entered. After first use, toggles between two formats for rack. F5 Exit Format keeps displayed format and deletes other format. ** Control U: Exit Undo Format Toggle Toggle on ability to restore format to what it was when Format entered. After first use, toggles between two formats for rack. F5 Exit Format keeps displayed format and deletes other format. ** Ctrl U F6: Undo Edit Ctrl U Toggle; Ctrl U U: Toggle Toggle on the ability to restore Fieldscroll on entering edit. After first use, Undo Edit toggles between two version of the text. On exiting edit, alternate Fieldscroll is lost. ** Ctrl U : Exit Undo Edit Toggle Toggle off the ability to restore Fieldscroll on entering edit. After first use, Undo Edit toggles between two version of the text. On exiting edit, alternate Fieldscroll is lost. ** W: change width W: Toggle The Display width is the relative weight given to how many characters wide of text should be displayed. Width lets you select those parameters ** W: Exit change width W: Toggle The Display width is the relative weight given to how many characters wide of text should be displayed. Use current width. ** Ctrl Y Delete Line Inverse: Ctrl P B Delete the current text line and put it into the paste buffer. A single cut goes into an empty buffer. Successive cuts up to 255 characters are appended together. 36 0 ** Zoomrack Inverse: See first menu item Cut, copy, paste or insert a Zoomrack. Use Insert Zoomrack to load a rack from disk. ** + increase size Inverse: - Increase the size by one for each plus, ,decrease it by 1 for each minus. ** - decrease size Inverse: + Decrrease the size by one for each plus, increase it by 1 for each minus. ** W: Screen Width Inverse: SelfChange the Width of Zoomracks display and Typeout (print). Sets print parameters and is used for smaller display computers ** H: Screen Height Inverse: Self Change the height of Zoomracks screen. This is used in printing labels and for computers with displays smaller than 25 by 80 ** 1... 0 Goto and turn on and off rack Inverse: Z - A number between 1 and 9 or 0 (a) turns on that rack and (b) goes to that rack. ** F4: Help Toggle Toggle on or off this 4-line Help screen. This screen will stay turned on until you press F4 to turn it off. ** W: Exit screen width. W: Toggle Accept width and change screen size to that width. ** H: Exit screen height Inverse: H: Toggle Accept screen height and change screen size to that height. ** N: New rack Inverse: Cut(DEL) rack Create and insert a new rack, and specify its format. F5- Exit new rack Toggle Rack format complete. Exit Format command ** A: Add field to this line Inverse: Cut field Add a new field to this rack format. Put it on the right side of the same line as the last field entered. ** N: Add field on next line Inverse: cut field Add a new field to this rack format. Put at the beginning of the next line. ** F5 Format rack Toggle Lets you insert a new rack and format it, or change the format of an existing rack. ** F5 Exit Format Toggle Exits from changing new rack format ** M: Make Demo copy of Zoomracks Inverse: None Make a file called ZRDEMO that will domonstrate Zoomrack's capabilities. Give copies to your friends to try. ** R: Copy rack format Inverse: None Copy the rack and its first card only. Used with Paste rack To create a new rack with the same format as the current rack. 40 8 ** A: Exit ASCII file save Inverse: none Tunr off ASCII file save menu. ** F: Save file in ASCII format Inverse: None Used to send Zoomracks data to external applications. Save this rack in ASCII on MS-DOS file with extension .ASC Note: Insert Rack command loads ASCII format files. ** F6: Exit fieldscroll edit. Toggle Zoom our from Fieldscroll. Turn of word processing editor. The word processor is similar to the line editor except that it takes over the full screen. ** Ctrl P R: Paste and replace Inverse: None Replace current line with contents of the paste buffer. ** Z: Display Zoomrack Z: Toggle Toggle on menu of Zoomrack display options ** Z: Exit Display Zoomrack Z: Toggle Toggle on menu of which of what Zoomracks to display, go to, or stop displaying ** - Stop displaying Zoomrack Inverse: rack number If several racks are being displayed, minus (-) turns off the current rack in multirack mode. To turn it on, type Z followed by its number. ** Set Display Parameters D: Toggle Toggle on a menu of display options. Typeout (print) uses the same display parameters. ** D: Exit Display D: Toggle Toggle off a menu of Zoomracks display and print parameters ** 0-9 Numbers: Inverse: Edit text Type a number. ** T: Truncate display mode Inverse: D C Turns off vowel deletion in Smart Zooms. Fields are truncated for display. (This display mode is slightly faster.) ** C: Compression display mode Inverse: D T Turns on vowel deletion in Smart Zooms. Fields are compressed for display. **B: Big characters Toggle Toggles between showing characters normal (small size) and big (double width). ** Drive Label A to C Inverse: self Select disk drive for Rack 0 rack directory display Label must be A, B or C. ** K select disk drive for Directory Rack Toggle Toggle on menu of disk drive selections ** K exit disk drive select for directory rack Toggle Toggle off menu of disk drive selections ** X Select default disk drive Inverse: K Select default disk drive for rack 0 directory 45 0 45 4 45 8 45 12 46 0 46 4 46 8 46 12
